Fix Error Samsung Washer DC Code

If you have a Samsung washer, you strength get a Samsung washer dc code while trying to do some laundry. Fortunately, a DC error is most frequently a simple fix! A DC code on your Samsung machine signifies that your washer is not capable of spinning because of the load imbalance. Correcting the DC issue is as easy as redistributing the weight of your existing load, taking out all the items for reducing the overall weight in your washer, or changing its suspension rods (or shocking the absorbers). Keep on reading for fixes to common reasons of the DC error and methods to fix the issue.

Table of Contents

What Causes The Samsung Washer DC Code?

There can be a lot of causes behind this issue, and a few of the most solid ones are as follows.

A part of your washer is almost certainly broken.
The washer may be unbalanced, and it may be put on the unlevel surface.
Clothes may have piled up at just one side.
Too few or too many clothes in your washer.

What Can You Do If You Receive The DC Error Code On Your Samsung Washer?

Try out the following methods to resolve this error code:

Method#1: Taking The Extra Clothes Out Or Putting More If There’s Some Single Item Load

Uneven distribution of your clothes can cause this issue. Therefore, to eliminate the issue, follow these steps.

Redistribute or spread out your clothes in your tub and restart its cycle.

Take out any excessive clothes if the machine’s weight limit has been exceeded and start its cycle again.
Append one or two pieces of clothes in the single item load.
Hit the start and pause button to eliminate the issue.

Check if the issue is now gone from the washer’s display.

Method#2: Checking For The Damaged Parts

The existence of some damaged parts can also cause this problem, and you can follow these steps to counter it.

First of all, deactivate your washer by simply unplugging its switch from the socket.
Then, remove the washer’s top panel.
After that, check the suspension spring or the damper shock for any sort of breakage.
Take out and replace them with the new ones, if broken.
Plug your washer back in and start it again.

Check the washer’s display and check if the issue still exists.

Method#3: Leveling Your Washer

The washer ought to be leveled; otherwise, it can cause this issue, and you can follow these steps for eliminating it.

First of all, deactivate your washer by simply unplugging its switch from the socket.
Make certain that the washer is placed at some leveled surface.
Check the washer’s balance by putting a bubble level on its top.
If it’s not balanced, then simply adjust the washer’s legs.
Loosen its lock nut from the leg you desire to adjust.